01
Integrated Feedstock
Cast from our own high-metallization sponge iron — a controlled, in-house charge that keeps chemistry consistent from heat to heat.
Product 02 · Steel Making
MSBillets
High-strength mild-steel billets cast from our induction furnaces and refined by 20 TPH ladle refining. The clean feedstock behind India’s TMT bars.
01 Product Overview
Steel Making
MS Billets · CCM Output · Sambalpur
Cast Clean, Rolled Consistent
Our MS billets are produced from in-house sponge iron and selected scrap, melted in 4×9 MT induction furnaces and refined through a 20 TPH ladle refining furnace (LRF) before continuous casting. The result is a low-inclusion, chemically consistent billet that rolls clean, shift after shift.
With a design capacity of 1,08,000 TPA, our billets feed re-rollers and TMT manufacturers who depend on a dependable, traceable feedstock. Every heat is spectrometer-verified and cast to tight dimensional tolerance.
- 0TPA
- Annual Capacity
- 4 × 9MT
- Induction Furnace
- 0TPH
- Ladle Refining
- 0%
- Spectrometer Tested
02 Product Specifications
Technical Specifications
Chemistry and dimensions verified per heat through in-house spectrometer testing. Full chemical analysis reports available on request.
| Parameter | Value | Test method |
|---|---|---|
| Carbon | 0.14 – 0.22% | Spectrometer |
| Manganese | 0.40 – 0.80% | Spectrometer |
| Sulphur | ≤ 0.045% | Spectrometer |
| Phosphorus | ≤ 0.045% | Spectrometer |
| Silicon | 0.10 – 0.30% | Spectrometer |
| Section size | 100 × 100 / 125 × 125 mm | Gauge |
| Length | 6 – 12 m | Measured |
- 0TPA
- Annual Capacity
- 4 × 9MT
- Induction Furnace
- 0TPH
- LRF Refined
- 0%
- Heat Tested
- LowIncl.
- Inclusion Control
- FullTrace
- Traceability
03 Key Features & Benefits
Why Re-rollers Choose Our Billets
Six advantages that go beyond price — from integrated sourcing to heat-level traceability.
04 Manufacturing Process
How We Make
From Charge To Cast Billet
A five-stage steelmaking route that melts a controlled charge, refines it in the ladle, and continuously casts it into low-inclusion billets.
01/ 05
Charge Preparation
In-house sponge iron and selected scrap are proportioned per heat to target the desired chemistry, balancing metallization, carbon and residuals.
Input Stage
- Sponge iron + selected scrap
- Charge calculated per heat
Melting In Induction Furnaces
The charge is melted in 4×9 MT induction furnaces. Temperature and chemistry are monitored throughout the melt to prepare a clean, homogeneous bath.
Core Process
- 4 × 9 MT induction furnaces
- Continuous bath monitoring
Ladle Refining (LRF)
Molten steel is transferred to a 20 TPH LRF where inclusions are removed and chemistry is fine-tuned to specification before casting.
Refining
- 20 TPH ladle refining
- Inclusion removal + trim
Continuous Casting
Refined steel is continuously cast into billets of consistent section size, with controlled cooling to preserve internal soundness.
Casting
- Continuous casting machine
- 100 × 100 / 125 × 125 mm
Testing & Dispatch
Every heat is spectrometer-verified and each billet checked for dimension before certified product is bundled and dispatched.
Output Stage
- Spectrometer tested
- Heat-wise certification
04 Manufacturing Process
How We Make
From Charge To Cast Billet
A five-stage steelmaking route that melts a controlled charge, refines it in the ladle, and continuously casts it into low-inclusion billets.
01/ 05
05 Quality & Safety
Zero Compromise
Tested, Traced, Accountable
Quality control at BR Steel is a system, not a check. Every heat of steel passes through multiple verification stages before it is cast, and every billet before it leaves our facility.
“Every Heat. Every Parameter. Every Dispatch. No Exceptions.”
- 01Spectrometer Chemical Composition TestingPer Heat
- 02Carbon & Manganese VerificationPer Heat
- 03Sulphur & Phosphorus ControlContinuous
- 04Dimensional & Section InspectionPer Cast
- 05Heat-Wise Traceability Documentation100%
06 Applications
Where It Goes
Where Our Billets Go
From re-rolling mills producing TMT bars to structural fabricators shaping the skyline — our billets sit inside the work that matters.
01
Rolling Mills & TMT
Low-inclusion feedstock that rolls clean into TMT bars, shift after shift, with consistent yield.
02
Infrastructure & Construction
The structural backbone of flyovers, bridges and metros — built with TMT rolled from our billets.
03
Engineering & Fabrication
Engineering-grade steel for components where consistent chemistry and internal soundness are non-negotiable.
03 Send an Enquiry
Built to scale
Whether you're a rolling mill sourcing billets, an EPC evaluating sponge iron supply, or an industrial buyer exploring long-term partnerships — reach out. Our sales team responds within 24 working hours.
Sales
sales@brsppl.com
Careers
hr@brsppl.com
Phone
+91 663 XXX XXXX
Hours
Mon – Sat · 9 AM – 6 PM
Business Enquiry
All fields marked with * are required. We respond within 24 working hours.